欧卡2如何使用m3u电台

欧卡2不支持m3u电台，报错日志：

00:06:15.201 : <ERROR> [fmod] (19) Unsupported file or audio format.
00:06:15.201 : <ERROR> [sound] Failed to initialize sound 'https://ali-m-l.cztv.com/channels/lantian/fm95/128k.m3u8'.

有什么解决办法吗，比如能不能转换一下？

https://forum.scssoft.com/viewtopic.php?t=312827

搞定，用 ffmpeg + icecast2

参见：https://www.streamingmediaglobal ... n=editors_selection


首先安装 icecast2，设置好密码，然后用 ffmpeg 推流。
例如 中国之声

ffmpeg -i https://ngcdn001.cnr.cn/live/zgzs/index.m3u8 -ab 64k -ac 1 -content_type audio/mpeg -f mp3 icecast://source:password@192.168.1.10:8000/zgzs

然后在浏览器中打开 http://192.168.1.10:8000/zgzs 测试，正常的话就可以添加到欧卡里了。

[https @ 0x55e507335a00] Opening 'https://ngcdn001.cnr.cn/live/zgzs/4723094.ts' for reading
av_interleaved_write_frame(): Broken pipe 128.0kbits/s speed=   1x    
Error writing trailer of icecast://source:hackme@172.17.0.1:8888/zgzs: Broken pipe
size=   83951kB time=01:29:32.83 bitrate= 128.0kbits/s speed=   1x    
video:0kB audio:83951kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
Conversion failed!

知行 发表于 2023-2-24 15:48

```
[https @ 0x55e507335a00] Opening 'https://ngcdn001.cnr.cn/live/zgzs/4723094.ts' for readi ...

https://superuser.com/questions/ ... hen-the-input-stops

If you're encountering a problem like this, it's most likely that your Icecast source_timeout is set too low. Try setting it to something unreasonably high or set it to -1 and it won't timeout at all.

This will ensure that ffmpeg will never timeout and the connection will remain open, thus eliminating the need for sending silence to mimic data being sent in the first place.

-ab bitrate 设置音频码率
-ar freq 设置音频采样率
-ac channels 设置通道 缺省为1
-an 不使能音频纪录
-acodec codec 使用codec编解码

https://mleite.medium.com/listen ... ator-2-ed5521006b3a

AzureCast

https://www.bilibili.com/read/cv20757190